Side Windows

Side Windows

Removing

- Remove rear window regulator => [ Rear Window Regulator ] Rear Window Regulator.

- Mark position of side window - 3 - to window regulator - 7 -.





- Remove nuts - 8 -.

- Remove side window - 3 - together with angle bracket - 1 -, spacers - 2 - and washers - 6 -.

Installing

- Place spacer - 2 - as shown on angle bracket pins - 1 - and insert pre-assembled side window - 3 - in window regulator - 4 -.





- Press window - 5 - onto pins from rear side and tighten nut.

- Coat new side window seal - 2 - with lubricant (e.g. soap solution).





- Insert upper seal in retaining strip - 1 - and pull it down.

• Seal must be flush with retaining strip at top.

Further installation is performed in the reverse order of removal.

Tightening torques => [ Side Windows Assembly Overview ] Side Windows Assembly Overview.