Timing Chain Covers Assembly Overview
Timing Chain Covers Assembly Overview
1 Bolt
• Tightening specification and sequence => [ Lower timing chain cover, tightening specifications and sequence ]
2 Crankshaft shaft seal, transmission side
• Replacing, refer to => [ Crankshaft Seal, Transmission Side ] Service and Repair.
3 Bolt
• Tightening specification and sequence => [ Lower timing chain cover, tightening specifications and sequence ]
4 Alignment bushing
• 2 pieces
5 Bolt
• Tightening specifications => [ (Item 13) Bolt ] Oil Filter Housing and Pressure Switch Assembly Overview
6 Left cylinder head gasket
7 Left timing chain cover
• Removing and installing, refer to => [ Left and Right Timing Chain Covers ] Left and Right Timing Chain Covers
8 Bracket
• For wiring harness
9 Bolt
• Replace
• Tightening specification and sequence => [ Left timing chain cover, tightening specifications and sequence ]
10 Lower timing chain cover
• Removing and installing, refer to => [ Lower Timing Chain Cover ] Lower Timing Chain Cover
11 Seals
• Replace
12 Bolt
• Tightening specification and sequence => [ Right timing chain cover, tightening specifications and sequence ]
13 Bracket
• For the electrical connectors
14 Bolt
• Replace
• Tightening specification and sequence => [ Right timing chain cover, tightening specifications and sequence ]
15 Right timing chain cover
• Removing and installing, refer to => [ Left and Right Timing Chain Covers ] Left and Right Timing Chain Covers
16 Right cylinder head gasket
17 Alignment bushing
• 2 pieces
18 Bolt
• Tightening specification and sequence => [ Lower timing chain cover, tightening specifications and sequence ]
19 Engine speed (RPM) sensor (G28)
20 Bolt
Left timing chain cover, tightening specifications and sequence
- Replace the bolts for the left timing chain cover.
- Tighten bolts in 2 stages in - 1 to 8 - sequence as follows:
Right timing chain cover, tightening specifications and sequence
- Replace the bolts for the right timing chain cover.
- Tighten bolts in 2 stages in - 1 to 8 - sequence as follows:
Lower timing chain cover, tightening specifications and sequence
- Tighten bolts in 6 stages as follows:
