Rear Lid Lock and Lock Cylinder Assembly Overview

Rear Lid Lock and Lock Cylinder Assembly Overview





1 - Rear Lid Lock

• Removal:

• Lid trim removed.

• Electrical harness connector disconnected.

• Release - 8 - disengaged.

• Remove nuts - 3 - and pull out lid lock.

• Installing:

• Engage lock cylinder release into lock.

• Insert lock and tighten nuts - 3 - to 8 Nm.

• Establish electrical connection.

2 - Electrical Connection

• Pull off when removing lid lock.

3 - Nut

• 8 Nm.

4 - Rear Lid Trim

5 - Lock Cover

• Clipped in trim.

6 - Lock Cylinder

7 - Bolts

• 8 Nm

8 - Cable