Right Combination Valve for Secondary Air Injection

Right Combination Valve for Secondary Air Injection

Removing

- Separate electrical connector - 1 - for mass air flow (MAF) sensor (G70).





- Disconnect air duct hose - 4 - at intake manifold.

- Unhook retainer for connections - 2 - and - 3 - at upper part of air filter housing.

- Remove bolts - arrows -.

- Remove upper part of right air filter housing.

- Remove air duct - 1 -.





- Remove bolts - arrows -.

- Remove lower part of right air filter housing.

- Pull hose - 1 - off from right combination valve for secondary air injection.





- Remove bolts - arrows - and remove right combination valve for secondary air injection.

Installing

- Installation is in reverse order of removal, note the following:

• Replace gaskets and O-rings.

• Secure all hose connections using hose clamps appropriate for the model type.

Tightening Specifications