Antitheft Motion Sensor: Service and Repair

Anti-Theft Alarm System Sensor

Removing





- If the control module was replaced, select the Replace function for the respective control module in Guided Fault Finding or Guided Functions.

- Remove front interior/reading light. Refer to => [ Front Interior Lamp/Reading Lamp ] Roof Trim Lamps and Switches.

- Release retaining clips - arrow A - and tip Anti-Theft Alarm System Sensor (G578) - item 3 - out of interior light/reading light - arrow B -.

- Using a small screwdriver - 1 -, carefully unclip individual interior monitoring sensors - 2 - from interior light/reading light.

Installing

Install in reverse order of removal, observing the following:

- Connect electrical connector.

- Install front interior/reading light. Refer to => [ Front Interior Lamp/Reading Lamp ] Roof Trim Lamps and Switches.