Power Door Lock Control Module: Service and Repair

Comfort System Central Control Module

Removing





Proceed as follows:

- If the control module will be replaced, select the comfort system central control module (J393) "Replace" function in the "Guided Fault Finding" operating mode.

- Remove rear shelf.

- Disconnect the electrical connectors - 3 through 6 -.

- Remove the bolt - arrow - and disengage the retaining frame - 2 -.

- Remove the comfort system central control module (J393) - item 1 -.

Installing

• Tightening specifications => [ tightening specifications ] Locations.

Installation is reverse of removal, but note the following:

- Install rear shelf.