Right Rear Fuse Panel Baseplate

Right Rear Fuse Panel Baseplate

Removing





- With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the rear shelf.

- Remove the bolts - 2 and 5 -.

- Remove the right rear fuse panel baseplate - 4 - from the retainer - 3 -.

- Release the retaining clips - arrows - and press the fuse panels - 1 and 6 - back and out of the baseplate.

- Remove the fuses from the fuse panel.





- Release retaining clips - arrows - and remove the cover from the fuse panel.

- Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.





• Check the exact assignment for the right rear fuse panel in the current wiring diagram.

Installing

• Tightening specification, refer to => [ Rear Relay Carrier and Fuse Panel Assembly Overview ] Rear Relay Carrier and Fuse Panel Assembly Overview.

Install in reverse order of removal, observing the following:

- Install the rear shelf.

- Connect battery. Required actions => [ Connecting ] Battery, Disconnecting and Connecting.