Right Rear Relay Carrier

Right Rear Relay Carrier

Removing





- With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the rear shelf.

- Remove the bolts - arrows -.

- Remove the relay carrier - 1 -.

- Remove the relay - C - and control modules - B - from the relay carrier.

- Unclip the corresponding socket auxiliary fuse panel - A -.

- Release all retainers - A arrows - and - B arrows -.





- Remove the right rear relay carrier.

Installing

• Tightening specification, refer to => [ Rear Relay Carrier and Fuse Panel Assembly Overview ] Rear Relay Carrier and Fuse Panel Assembly Overview.

Install in reverse order of removal, observing the following:

- Install the rear shelf.

- Connect battery. Required actions => [ Connecting ] Battery, Disconnecting and Connecting.