Ignition Coil: Service and Repair

Ignition Coils

Special tools, testers and auxiliary items required

• Ignition Coil Puller (T10095 A)

• Assembly Tool (T10118)

Removing

- Disconnect electrical harness connectors to ignition coils, to do so attach (T10118) on release button - arrow - and carefully disconnect harness connector.





- Position (T10095 A) on ignition coils - arrow - as shown in illustration and remove ignition coils one after another.





Installing

Installation is in reverse order of removal, note the following:

- Insert ignition coil into corresponding spark plug shaft so that the straight connector sides fit with each other - arrows -.