Secondary Air Injection Pump

Secondary Air Injection Pump

Removing

- Disconnect secondary air hose at position indicated by - arrow -.





- Free up air hose to Secondary Air Injection (AIR) pump.

- Remove center noise insulation fasteners - 1 to 3 -.





- Free up coolant hose at bottom on fan shroud.

- Disconnect electrical connector - 3 - at secondary air injection (AIR) pump motor (V101) and free up electrical wiring.





- On vehicles with DSG transmission, remove coolant pipe bracket - 2 - to transmission oil cooler.

- Remove bolts - 1 -.

- Loosen bolt - 4 - and remove secondary air injection (AIR) pump with bracket.

Installing

Installation is in reverse order or removal.

Tightening Specifications