Selector Shaft Cleaning

Selector Shaft Cleaning

• Rules of cleanliness for working on transmissions. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

• General repair information. Refer to => [ General Repair Information ] General Repair Information.

• Transmission Control Module (TCM) (J217) removed.

Work Procedure

- Clean the catch - arrow - of the selector shaft. Do not use fluffy materials for cleaning. Clean contact surfaces of the magnet thoroughly of metal shavings and the like.





• Make sure that spring - A - and roller - B - are secured properly.

- If necessary, clean sensors - A -, - C - and - D - of contamination and metal shavings.





- Install the Transmission Control Module (TCM) ( J217). Refer to => [ Transmission Control Module ] 01J Transmission.