Selector Mechanism Overview

Selector Mechanism Overview

There is a risk of injury and accident from accidentally engaging a gear when the engine is running.

• Before work is done with the engine running, move the selector lever into P and press the parking brake button to engage the electromechanical parking brake.

Before disassembling the selector mechanism, perform check. Refer to => [ Selector Mechanism, Checking ] Selector Mechanism, Checking.






1 Selector Lever Handle

• Refer to => [ Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview ] Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview

2 Decorative Ring

• Removing and installing, refer to => [ Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview ] Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview

3 Selector Lever Boot

• Removing and installing, refer to => [ Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview ] Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview

4 Clamp

• For securing the selector lever handle to the selector lever

• Removing and installing, refer to => [ Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview ] Selector Lever Handle and Selector Lever Transmission Range Position Display Unit Overview

5 Selector Lever Transmission Range Position Display (Y26)

• Refer to=> [ Selector Lever Transmission Range Position Display Unit ] Selector Lever Transmission Range Position Display Unit

6 Nut

• 10 Nm

• Quantity: 4

• For securing the shift mechanism to the body

7 Rubber Seal

8 Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189)

• Refer to => [ Selector Lever Sensor System Control Module with Tiptronic Switch ] Selector Lever Sensor System Control Module with Tiptronic Switch

9 Selector Mechanism Function Unit

• Can only be replaced as a unit

• Refer to => [ Shift Mechanism Function Unit ] Shift Mechanism Function Unit

10 Shift Lock Solenoid (N110)

• Refer to => [ Shift Lock Solenoid (N110) ] Service and Repair

11 Transmission Park Selector Switch (F305)

• Consists of two microswitches on the circuit board on the shift lock solenoid

• Can only be replaced together with the shift lock solenoid, refer to => [ Shift Lock Solenoid (N110) ] Service and Repair

12 Noise Insulation

• Not on all vehicles; for the correct allocation, refer to the Parts Catalog

13 Lock Washers

• Quantity: 4

• For securing the noise insulation to the shift mechanism function unit

14 Retaining Clip

• Secures selector lever cable on selector mechanism function unit

15 O-ring

16 Selector Lever Cable

• Do not bend

• There are different versions depending on the vehicle. For the correct allocation, refer to the Parts Catalog

• Refer to => [ Selector Lever Cable Overview ] Description and Operation

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

17 Cover

• Over the shift lock solenoid