Lower Seat Frame Assembly Overview

Lower Seat Frame Assembly Overview

• On the front seat, the upper and lower seat pan frames can be separated and replaced individually.

• When removing the seat pan, make sure the bushings in the bearing points (upper and lower frame threaded connection) are not damaged. These bushing cannot be replaced with workshop materials.





1 Screw

Self-locking

• 28 Nm

• Quantity: 3

• Replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

2 Seat Pan Upper Frame

• Removing and installing, refer to => [ Lower Seat Frame ] Power Front Memory Seats

3 Bushing

• Inserted in all bracket locations

• Cannot be replaced with workshop materials

• If the bushings are damaged, assembly part must be replaced.

4 Seat Pan Lower Frame

• Removing and installing, refer to => [ Lower Seat Frame ] Power Front Memory Seats

5 Bolt

• 28 Nm

• replace

6 Nut

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

7 Driver Seat Height Adjustment Motor (V245) or Front Passenger's Seat Height Adjustment Motor (V246)

• Removing and installing, refer to => [ Driver and Front Passenger Height Adjustment Motors ] Power Front Memory Seats

8 Seat Forward/Back Adjustment Motor (V288)

• Cannot be removed and installed with workshop materials

• Stays on seat pan lower frame, refer to => [ (Item 4) Seat Pan Lower Frame ]

9 Driver Seat Angle Adjustment Motor (V243) or Front Passenger Seat Angle Adjustment Motor (V244)

• Removing and installing, refer to => [ Seat Angle Adjustment Motor ] Power Front Memory Seats

10 Screw

Self-locking

• 20 Nm

• Replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter)