Secondary Air Injection Right Combination Valve

Secondary Air Injection Right Combination Valve

Removing

- Remove the throttle valve control module (J338).

- Disconnect the connectors - 1 - and - 2 - on the back of the cylinder head on the right side.






- Remove the bolt - arrow - and remove bracket.

- Remove the bolts - 1 - for the secondary air hose.






- Remove the vacuum line - 2 - from the secondary air injection (AIR) combination valve.

- Remove the bolts - 3 - and remove secondary air injection (AIR) combi-valve.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Secondary Air Injection System Overview ] Service and Repair.

• Replace the gasket.

- Install throttle valve control module.