Roof Grab Handle

Trim

Roof Grab Handle

Removing

- Using a screwdriver, pry out covers - 3 - (Qty. 2) from below.





- Remove bolts - 2 - (Qty. 2).

• Tightening torque: 4 Nm.

- Remove roof grab handle - 1 -.

Installing

• Threaded holes for roof grab handle must be cleaned of locking compound residue after removal. Otherwise, new screws could lock up when installed and shear off when removed again.

• They can be cleaned with a thread cutter.

• Replace roof grab handle screws (self-locking).