Left Combination Valve for Secondary Air Injection

Left Combination Valve for Secondary Air Injection

Removing

- Activate vehicle lifting mode.

- Remove left front wheel.

- Remove front part of wheel housing liner at left front.

- Pull off both air duct hoses - arrows - at bottom of lower part of left air filter housing, thereby pressing the release buttons.





- Disconnect electrical connector - 3 - for Mass Air Flow (MAF) Sensor 2 (G246).





- Disconnect hose - 2 - from air duct hose.

- Disconnect air duct hose - 1 - at intake manifold.

- Remove bolts - arrows -.

- Remove upper part of left air filter housing.

- Remove air duct - 1 -.





- Remove bolts - arrows -.

- Remove lower part of left air filter housing.

- Pull hose - 1 - off from left combination valve for secondary air injection.





- Remove bolts - arrows - and remove left combination valve for secondary air injection.

Installing

- Installation is in reverse order of removal, note the following:

• Replace gaskets and O-rings.

• Secure all hose connections using hose clamps appropriate for the model type.

- Deactivate vehicle lifting mode.

Tightening Specifications