Harmonic Balancer - Crankshaft Pulley: Service and Repair

Vibration Damper with Ribbed Belt Pulley

Removing

- Remove ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Remove the bolts - 1 - and the vibration damper with the ribbed belt pulley.






Installing

• Tightening specification, refer to => [ Ribbed Belt Drive Overview ] Ribbed Belt Drive Overview.

Install in reverse order, paying attention to the following:

• Replace the vibration damper bolts.

• Installation is only possible in one position because of the offset holes.

- Install the ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.