Valve Guide: Testing and Inspection

Valve Guides, Checking

Special tools, testers and auxiliary items required

• Dial Gauge Holder (VW 387)

• Dial Gauge 0-10 mm (VAS 6079)

Procedure

• If the valve is replaced during repair, use a new valve for measurement.

• Due to different stem diameters, only use an intake valve in the intake guide and an exhaust valve in the exhaust guide.

- Place valve in valve guide.

• Valve stem tip must seal with valve guide.

- Determine tip clearance.






• Wear limit: 0.8 mm.

- If the wear limit is exceeded, measure using new valves.

- Replace the cylinder head if the wear limit is still exceeded.

• The valve guides cannot be replaced.