Ignition Coil: Service and Repair

Ignition Coils

Special tools, testers and auxiliary items required

• Puller for ignition coil (T10095 A)





• Assembly tool (T10118)





Removing

- Disconnect electrical connectors at ignition coils by placing assembly tool (T10118) on release button - arrow - and carefully removing connector.





- Place puller for ignition coil (T10095 A) on ignition coils - arrow -, as shown in illustration, and pull out ignition coils one after another.





Installing

Installation is in reverse order of removal, note the following:

- Place ignition coils in respective spark plug shaft so the straight connector sides fit with each other - arrows -.