Selector Mechanism Shift Unit

Selector Mechanism Shift Unit

Removing

- Shifter mechanism function unit, removing => [ Selector Mechanism Unit ] Selector Mechanism Unit.

- Press boot - arrow - forward out of selector mechanism shift unit.





- Remove retaining hooks - 1 - and - 2 -.





- Remove bolts - arrows -.

- Pull selector mechanism shift unit - 1 - back slightly and remove screws - arrows - on center bracket - 2 -.





- Remove selector mechanism shift unit upward.

- Remove center bracket upward, it must not be installed again.

• The center bracket is only needed for factory production.

Installing

Install in reverse order of removal, note the following:

Torque specifications: => [ Selector Mechanism, Assembly Overview ] Selector Mechanism, Assembly Overview

- Insert selector mechanism shift unit from above into opening.

• Ensure seal is seated correctly on selector mechanism shift unit.

- Insert selector lever cable - 3 - through hole in selector mechanism shift unit.

- Tighten screws - arrows -.





- Insert retaining hooks - 1 - and - 2 -.

- Carefully insert boot - arrow - on selector lever cable all around in selector mechanism shift unit.





- Install shift mechanism function unit => [ Selector Mechanism Unit ] Selector Mechanism Unit.