Global Positioning System Module: Service and Repair

Vehicle Positioning System Interface Control Module

Removing





- Remove the front passenger seat.

- Lift the carpet under the front passenger seat.

- Remove nuts - arrows - and remove the vehicle positioning system interface control module (J843) - 1 -.

- Disconnect the connectors - 2, 3 and 4 -.

Installing

• Tightening specification, refer to => [ Front Relay Carrier and Fuse Panel Assembly Overview ] Front Relay Carrier and Fuse Panel Assembly Overview.

Install in reverse order of removal, observing the following:

- Install the carpet.

- Install the front passenger seat.