Front Window Guide

Front Window Guide

Removing

• The lower speaker is removed.

Proceed as follows:

- Remove the door trim.

- Remove the door seal and front interior window seal retaining knobs from the door shell => [ Door Seal and Inner Window Shaft Strip ] Door Seal and Inner Window Shaft Strip.

- Remove the nut - 2 - and bolt - 3 -.





- Remove the front window guide - 1 - upward out of the door.

Installing

• Tightening specifications => [ Window Regulator Motor and Window Regulator Assembly Overview ] Window Regulator Motor and Window Regulator Assembly Overview.

Installation is reverse of removal, but note the following:

• When inserting the front window guide, make sure the exterior rearview mirror wiring harness is not damaged.

- Insert the window guide - 1 - in the front door.

- Tighten the nut - 2 - and bolt - 3 - by hand. The window guide must still be able to move slightly.

- Adjust the door window => [ Door Window ] Door Window, then tighten the nut - 2 - and bolt - 3 -.