Removal and Replacement

Exhaust System, Installing

• Align exhaust system when cold.

- Loosen clamping sleeve threaded connections - 17 - => [ Clamping Sleeve ] Muffler Assembly Overview.





- Press rear muffler as far forward as possible - arrow - until tension at left retaining loop - a - = 11 to 13 mm.

- Install clamping sleeve in angle position shown.





• Threaded connections point toward the right.

• Nuts face up.

• alpha = approximately 20°

• Tightening specifications, refer to => [ Muffler Assembly Overview ] Muffler Assembly Overview.