Right Flange Shaft Seat on Outer Bevel Box, Replacing

Right Flange Shaft Seat on Outer Bevel Box, Replacing

Special tools, testers and auxiliary items required

• Thrust Piece (T10049)

Procedure

• Transmission installed.

- Remove right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft.

- Pry out the shaft sealing ring for the flange shaft with an assembly lever.

- Lightly oil outer circumference of new shaft seal.

- Fill area between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).





- Drive in sealing ring to stop using (T10049).





- Install right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft.

- Check the transmission oil level in the bevel box and replenish. Refer to => [ Manual Transmission, Checking Gear Oil Level ] Manual Transmission, Checking Gear Oil Level.