Seal Between Transmission and Bevel Box

Seal between Transmission and Bevel Box

Special tools, testers and auxiliary items required

• Pulling Hook (T20143)

• Thrust Piece (T10298)

Procedure

• The bevel box is removed. Refer to => [ Bevel Box, Removing ] Bevel Box, Removing.

- Pry out sealing ring on bevel box with (T20143/1) or (T20143/2).





- Lightly oil outer circumference of new shaft seal.

- Fill area between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).





- Drive in shaft seal as far as stop with (T10298).