Operation CHARM: Car repair manuals for everyone.

Shaft Sealing Ring For Bevel Box With Manual Transmission Installed, Replacing






Shaft Sealing Ring for Bevel Box with Manual Transmission Installed, Replacing

Special tools, testers and auxiliary items required

Oil Collecting and Extracting Device (V.A.G 1782)

Pulling Hook (T20143/2)

Thrust Piece (T10243)

Procedure

The bevel box is removed. Refer to => [ Bevel Box, Removing ] Bevel Box, Removing.

- Place drip tray (VAS 6208) underneath.

- Pry the bevel box shaft sealing ring off with the (T20143/2) or extractor lever (VW 681).

- Fill space between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).





- Lightly oil outer circumference of new shaft seal.

- Drive in the shaft sealing ring to the stop.





- Check the transmission oil level in the manual transmission and fill. Refer to => [ Manual Transmission, Checking Gear Oil Level ] Manual Transmission, Checking Gear Oil Level.