Shift Cable and Selector Cable to Model Year 2007 Assembly Overview

Shift Cable and Selector Cable to Model Year 2007 Assembly Overview

• Grease bearing areas and slide surfaces with grease (G 000 450 02).





1 Retaining Washer

2 Control Cable Retainer

• For the selector cable on the selector relay lever

• Allocation

• Release to adjust selector mechanism => [ Release cable retainer for
selector and shift cables as follows: ] Adjustments

3 Retaining Washer

4 Control Cable Retainer

• For shift cable to transmission shift lever

• Allocation

• Release to adjust selector mechanism => [ Release cable retainer for
selector and shift cables as follows: ] Adjustments

5 Bushing

6 Grommet

7 Shift Cable

• Removing and installing, refer to => [ Shift Cable and Selector Cable ] Service and Repair

• From VIN 8J-7-013001, modified attachment to the shift lever within the shift mechanism - 8 - => [ Shift Cable ] Shift Lever and Shift Housing For Vehicles From VIN 8J-7-013001 Assembly Overview

• Adjusting, refer to => [ Shift Mechanism, Adjusting ] Adjustments

8 Lock Washers

• No longer used from VIN 8J-7-013001

9 Circlips

10 Selector Cable

• Removing and installing, refer to => [ Shift Cable and Selector Cable ] Service and Repair

• From VIN 8J-7-013001, modified attachment to the selector bracket within the shift mechanism - 6 - => [ Selector Cable ] Shift Lever and Shift Housing For Vehicles From VIN 8J-7-013001 Assembly Overview

• Adjusting, refer to => [ Shift Mechanism, Adjusting ] Adjustments

11 Bolt

• 20 Nm

• Quantity 3

12 Control Cable Mounting Bracket

13 Nut

• Only in vehicles with a 4-cylinder engine

Allocation of Control Cable Retainers





The holes in the control cable retainers have various diameters.






Starting in 06/2006, Smaller Mounting Pin Diameter for the Shift Cable Retainer