Shift Knob With Shift Lever Boot

Shift Knob with Shift Lever Boot

• The shift knob is removed together with the shift lever boot and the center console cover.

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• Hose Clip Pliers (V.A.G 1275)

Removing

- Open the ashtray.

- Carefully pry trim from center console - arrows -.





- Disconnect electrical connector on trim.





- Fold trim - 3 - up over shift knob.

- Open clamping sleeve - 1 - and remove shift knob - 2 - together with shift lever boot and trim - 3 -.

- Disconnect shift lever boot and center console trim - 3 - => [ Disconnect the Center Console
Trim and Mounting Frame for the Shift Lever Boot ] Shift Knob and Covers Assembly Overview

Installing

Install in reverse order, paying attention to the following:

- Press shift knob onto shift lever as far as stop.

- Secure shift knob to shift lever with a new clamp - 1 - using (V.A.G 1275).