Headlamp Range Control Module (J431)

Headlamp Range Control Module (J431)

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" in the Vehicle diagnostic tester.

- Remove instrument cluster. Refer to => [ Instrument Cluster ] Instrument Cluster.

- Remove bolts - arrows - and remove Headlamp Range Control Module - item 1 -.






- Disconnect electrical connector - 2 -.

- To disconnect electrical connector, press catch - 1 -, turn retaining bracket in - direction of arrow - and remove connector.






Installing

• Tightening specification, refer to => [ Automatic Headlamp Vertical Aim Control Overview ] Automatic Headlamp Vertical Aim Control Overview.

Install in reverse order of removal. Note the following:

- Install instrument cluster. Refer to => [ Instrument Cluster ] Instrument Cluster.