Seals and Gaskets: Description and Operation

Front Final Drive, Shaft Seal Overview

• => [ Repair Information ] Repair Information.

• => [ Clean Working Conditions ] Clean Working Conditions.






1 Shaft Seal

• For the left flange shaft

• Removing and installing, refer to => [ Left Flange Shaft Seal ] Left Flange Shaft Seal

2 Differential

3 Bolt

4 Shaft Seal

• For the right flange shaft

• Removing and installing, refer to => [ Right Flange Shaft Seal ] Right Flange Shaft Seal

5 Right Flange Shaft

• Removing and installing, refer to => [ Right Flange Shaft ] Right Flange Shaft

6 Locking Ring

• Removing and installing, refer to => [ Right Flange Shaft ] Right Flange Shaft

7 Fill and Inspection Plug

• Tightening specification => [ (Item 4) Fill and Inspection Plug ] Final Drive, Differential (0AW Continuously Variable Transmission)

8 Front Final Drive Cover

• Pay attention to the alignment sleeves

• After removing the cover for the front final drive, perform the pre-filling, refer to => [ Gear Oil in Front Final Drive, Filling after Repair ] Gear Oil In Front Final Drive, Filling After Repair

9 O-ring

• On the front final drive cover

• Replace

10 Bolt

11 Gearshift Lever

12 Shaft Seal

• For the gearshift shaft

• Removing and installing, refer to => [ Selector Shaft Seal ] Selector Shaft Seal

13 Transmission

14 Left Flange Shaft

• Removing and installing, refer to => [ Left Flange Shaft ] Left Flange Shaft

15 Bolt

16 Bracket

17 Ball Bearing

• For the left flange shaft

18 Circlip

• Replace

19 Shaft Seal

• For the input shaft

• Removing and installing, refer to => [ Input Shaft Seal ] Input Shaft Seal

20 Dual Mass Flywheel