Selector Lever Cable Overview

Selector Lever Cable Overview






1 Clip

• For the selector lever cable on the selector mechanism function unit

2 O-ring

• Replace

3 Bolt

• 13 Nm

• For selector lever cable adjustment

• Attached to the selector mechanism function unit

4 Bolt

• 8 Nm

• Quantity: 2

5 Selector Lever Cable Bracket

6 Nut

• 13 Nm

• Quantity: 2

• Securely mounted on the selector lever cable

• The selector lever cable is secured to the support bracket

7 Selector Lever Cable

• Do not bend

• Removing and installing, refer to => [ Selector Lever Cable ] Service and Repair

• The selector lever cable must be replaced if the rubber grommet is damaged.

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

• Make sure the rubber grommet on the transmission side is not twisted when installing.

• Adjusting, refer to => [ Selector Lever Cable, Adjusting ] Adjustments

8 Gearshift Lever