Center Bracket

Center Bracket

Removing






• The backrest only needs to be disengaged from the mounts to remove and install the center bracket. The release cables in the connector stations must not be disconnected.

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Remove the right 2/3 section of the backrest. Refer to => [ Backrest ] Backrest.

- Remove the left 1/3 section of the backrest. Refer to => [ Backrest ] Backrest.

- Remove bolts - 1 - (quantity: 4).

- Remove the center bracket - 2 - from the vehicle floor - 3 -.

Installing

Install in reverse order of removal.

For the correct tightening specifications, refer to => [ Divided Backrest Overview ] Divided Backrest Overview.