Roof Grab Handle

Roof Grab Handle

Special tools, testers and auxiliary items required

• Special hook (3370)

Removing





- Open roof grab handle cover - 1 - with (3370).

- Remove the bolts - 2 - and - 3 -.

- Remove roof grab handle.

Installation

Installation is reverse of removal, but note the following:

• Threaded holes for roof grab handle must be cleaned of locking compound residue after removal. Otherwise, new screws could lock up when installed and shear off when removed again.

• They can be cleaned with a thread cutter.

• Replace roof grab handle screws (self-locking).

Tightening Specifications





* Replace screws.