Oil Level Sensor: Service and Repair

Oil Level Thermal Sensor

Removing

• Engine oil drained.

- Disconnect electrical connector - 3 -.





- Remove the nuts - 1 - and the Oil Level Thermal Sensor (G266) - 4 -.

Installing

• Tightening specifications, refer to => [ Oil Pan Upper and Lower Sections, Oil Pump and Oil Cooler Assembly Overview ] Oil Pan Upper and Lower Sections, Oil Pump and Oil Cooler Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace the seal - 2 -.

- Fill engine oil and Check oil level.