Seat Angle Adjustment Motor V243/V244

Seat Angle Adjustment Motor V243/V244

Driver seat angle adjustment motor (V243) / front passenger seat angle adjustment motor (V244)

Removing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, disconnecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

- Remove the front seat:

• Standard seat and multicontour seat => [ Standard Seat ] Standard Seat.

• Comfort reclining seat => [ Comfort Reclining Seat ] Comfort Reclining Seat

- Attach the front seat to the fixture for seat repair (VAS 6136). Refer to => [ Installing Front Seat on Fixture for Seat Repair VAS 6136 ] Installing Front Seat on Fixture for Seat Repair VAS 6136.

- Remove bolt - 2 - for seat angle adjustment motor (preset by the manufacturer) adjusting spindle - 1 -.













Risk of damage to the bushing - 1 - in the bearing point - 2 - (adjusting spindle/seat pan bolting).

• The bushing cannot be replaced with workshop materials.

• If the bushing is damaged, the corresponding assembly parts must be replaced.

- Disconnect harness connector - 3 - at the seat angle adjustment motor.






- Remove the bolts - 1 - and the seat angle adjustment motor - 4 -.

Installing

Installation is performed in reverse order of removal, noting the following:

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, connecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

• Observe all measures when installing the front seat. Refer to => [ Standard Seat ] Standard Seat.

Installation note: For example tightening specifications, replace components => [ Seat Angle Adjustment Motor Assembly Overview ] Seat Angle Adjustment Motor Assembly Overview.