Seat Overview

Seat Overview

• The overview is based on the two thirds left rear seat and one third right rear seat.






1 Mounting Grommet

• Quantity: 2

• For securing bench seat.

• Clipped into the seat frame.


The mounting grommets must be replaced each time the bench seat is removed.

• Removing and installing, refer to => [ Remove the mountings from the seat frame. ] Bench Seat.

2 Bench Seat

• Removing and installing, refer to => [ Bench Seat ] Bench Seat.

3 Cover

• For the seat rail.

• Vehicle equipment level or depending on the version.

• Removing with the seat removed.

4 Bolt

• 50 Nm

• Quantity: 4

• Tightening sequence. Refer to => [ Installing ] Seat Frame.

5 Rear Seat

• Removing and installing, refer to => [ Seat Frame ] Seat Frame.

6 Cover

• For the LATCH child seat anchorage.

• Special equipment

• Quantity: 2

• Clipped to the LATCH child seat anchorage brackets that are welded to the seat frame.

Seat Rail Cover






- Remove the seat rail cover - arrow -.