Power Sunroof Control Module

Power Sunroof Control Module

Removing

- Remove the sunroof regulator.

- Disconnect all connectors for the power sunroof control module.

- Remove the screws on the sunroof motor and remove the power sunroof control module from the headliner.

Installation

- Install the power sunroof control module - 2 - and tighten the screws - arrows - to 3.5 Nm.





- Connect the connector - 1 - on the sunroof motor - 2 -.

- Install the headliner..

- After completing the work procedure, perform an adaptation on the sunroof motor. Refer to => [ Sunroof Adaptation ] Testing and Inspection.