Selector Lever Scale Illumination

Selector Lever Scale Illumination

Removing

Proceed as follows:

- Engage parking brake.

- Place selector lever in position N.

- Switch ignition off and remove ignition key.

- Carefully pry selector lever boot out of boot trim using a small screwdriver - arrow 1 -.





- Pull selector lever boot upwards at both sides - arrows 2 and 3 -.

- Fold selector lever boot up.

- Pry center console trim out of console using Trim Removal Wedge (3409) - arrows -.





- Disconnect electrical connectors and remove center console trim.

- Remove bolts - arrows - and remove selector lever boot trim - 1 - with selector lever scale illumination (L101).





Installing

• Tightening specification, refer to => [ Selector Lever Handle and Scale Illumination Assembly Overview ] Selector Lever Handle and Scale Illumination Assembly Overview.

Installation is in reverse order of removal.