iPod Baseplate Connectors and Connector Assignments

iPod Baseplate Connectors and Connector Assignments

• Unlisted connector terminals are not used.

Black 12-Pin Connector





1 Data out to the radio (R)/operating electronics/navigation system control module (J402)
2 CLK out to the radio/operating electronics/navigation system control module
3 Terminal 31
4 Data in from the radio/operating electronics/navigation system control module
6 Continuous plus from the radio/operating electronics/navigation system control module
7 Right signal to the radio/operating electronics/navigation system control module/satellite radio (R146)
8 Positive switched from the radio/operating electronics/navigation system control module
9 Signal ground from the radio/operating electronics/navigation system control module/satellite radio
10 Left signal to the radio/operating electronics/navigation system control module/satellite radio
11 TOC Check Control (not used)
12 Terminal 58 (not used)