Ignition Coil: Service and Repair

Ignition Coils with Power Output Stages

Special tools, testers and auxiliary items required

• Puller (T40039)

Removing

- Release the electrical connectors on all ignition coils and remove them from the ignition coils.

- Using the (T40039) , remove all the ignition coils from the spark plug shaft.






Installing

- Insert all ignition coils loosely into each spark plug shaft.

- Align the ignition coils to the connectors and then connect all of the connectors simultaneously onto the ignition coils.

- Press the ignition coils uniformly onto the spark plugs by hand (do not use any impact tools to do this).