External Audio Source Connection (R199)

External Audio Source Connection (R199)

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

• Fiber Optic Pliers Repair Set (VAS 6223)

• Protective Cap For Cable Connector (VAS 6223/9)

The external audio source connection is located inside the glove compartment.

- Turn off all electrical consumers.

- Remove the key.

Removing

- Open the glove compartment.

- Insert the two clips of the (T10057) into the slits on the external audio source connection until they engage. Points on the grip eyelets of tool face outward.






- Pull the external audio source connection out of mounting frame.

- Disconnect all of the connectors from the external audio source connection.

Versions with MOST bus

- Connect the (VAS 6223/9) - 1 - to the connector for the MOST-Bus - 2 -.






All

- Remove the (T10057) , push locking tabs on the external audio source connection to do so.

Remove the internal control unit

- Remove the screw - 2 - on back side (2 Nm).






- Press the tabs - 4 - and - 5 - down and up and remove the control module - 5 - back from the frame - 1 -.

Installing

- Connect all harness connectors.

- Slide the external audio source connection on the mounting frame until it engages.

Overview, refer to => [ Component Location Overview ] Component Location Overview.