Outer Tail Lamp

Outer Tail Lamp

Removing






- Turn off the ignition and remove the ignition key.

- Turn the light switch to the "0" position.

- Open the luggage compartment side trim cover.

- Remove the threaded pins - 2 -.

- Pivot the tail lamp - 1 - outward - arrow - and disengage the retaining pins from the body.

- Disconnect the electrical connector.

Installing

• Tightening specification, refer to => [ Outer Tail Lamp ] Outer Tail Lamp.

Install in reverse order of removal, observing the following:

• The self-adhesive seal on the tail lamp must seal correctly.

- Position the tail lamp on the body and press the retaining pins into the holes.

- Tighten the threaded pins.