Internet Access Control Module (J666)

Internet Access Control Module (J666)

The internet access control module - 1 - is located in the glove compartment - 2 -.






- Turn off all electrical consumers.

- Remove the key.

Removing

- Open the glove compartment.

- Remove the chip card.

- Slide the internet access control module - 1 - in the direction of the - arrow - until it can be removed from the trim - 2 -.






- Disconnect the connectors - 3 - from the chip card reader control module (J676) - 1 -.

Installing

- Install in reverse order of removal.

- Peel off the protective backing from the internal battery.

If the internet access control module is replaced, the consumer must reconfigure it again.