Parking Aid Control Module, Vehicles With Trailer Hitch

Parking Aid Control module, Vehicles with Trailer Hitch

Removing

- If the control module was replaced, select the Replace function for the respective control module in Guided Fault Finding or Guided Functions.

- Select the function or path.






- Follow the instructions on the Vehicle Diagnosis Tester display.

- Open the right luggage compartment side trim cover.





- Remove the nuts - 1 - and - 3 -.

- Disengage the electrical wire from the guides - arrows - on the retaining frame - 2 - and disconnect the cable tie - 4 -.

- Remove the retaining frame upward.

- Disconnect electrical connectors - 2 through 4 -.





- Release the retaining clip - arrow - and remove the parking aid control module (J446) - item 5 - from the retaining frame - 1 -.

Installing

• Tightening specification => [ retaining frame, tightening specifications ] Parking Aid Assembly Overview

Install in reverse order of removal, observing the following

• When installing, install cable ties at same location.