Mirror Adjusting Unit Mount

Mirror Adjusting Unit Mount

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing

- Remove the door trim.

- Remove the speaker trim and the treble speaker bracket.

- Disconnect the electrical connector by pulling the retainer - 3 - back - arrow A - and pressing the release - 4 - down.






- Pry the grommet - 2 - out of the exterior mirror seal.

- Remove the retainers from the door shell in the exterior mirror area.

- Remove the exterior mirror seal - 1 - off of the door shell while removing the bolts - arrows -.

- Remove the mirror adjusting unit mount while guiding the wiring harness out through the door opening.

Installing

• For the correct tightening specifications, refer to => [ Exterior Mirror Vehicles Built from 06.09 Overview ] Exterior Mirror Vehicles Built From 06.09 Overview.

Install in reverse order of removal. Note the following:

- Install the exterior mirror housing. Refer to => [ Installing ] Outer Door Seal.

- Install the treble speaker bracket and speaker trim.

- Install the door trim.