Parking Lamp Bulbs

Parking Lamp Bulbs

Removing





- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Remove the turn signal/parking lamp housing cover - 1 - from the headlamp housing - arrow -.

- Turn the turn signal socket - 1 - counterclockwise - arrow - and remove it from the housing.





- Pull the socket - 1 - with the bulb out of the reflector in - the direction of the arrow -.





- Remove Parking Lamp from socket.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the socket without touching the bulb with bare hands.

- Push socket into reflector until it engages noticeably.

- Close the housing cover - 1 -. When doing this, the strap - 2 - must align with the mark - 3 - on the headlamp housing.





- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.