Rear Belt Anchor

Rear Belt Anchor

• Removing and installing is identical for the left and right sides.

Removing






- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove the bolt - 1 - from the belt end fitting - 2 -.

Installing

Install in reverse order of removal. Note the following:

- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.

• The cut-out on the bolting surface of the seat belt latch must be above the pin on the floor panel.

For the correct tightening specifications, refer to => [ Rear Three-Point Seat Belt Overview ] Rear Three-Point Seat Belt Overview.