Operation CHARM: Car repair manuals for everyone.

Fuse Panel A In Luggage Compartment






Fuse Panel A in Luggage Compartment

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing





- With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the tool kit mount - 1 -.

If it not possible to remove fuse panel A from the battery terminal, then remove the screw - 4 - on the battery bracket - 3 - and pull the battery - 2 - just a little to the left - arrow -.

- Loosen the nut - 1 - several turns and remove the battery positive wire terminal clamp with the fuse panel A from the battery terminal.





- Release the spring - 3 - and open the cover - 2 - over fuse panel A - arrow -.

- Disconnect electrical wires - 1, 5, 6 and 8 -.





Ignore items - 2 , 3 -.

- Remove the positive terminal clamp - 4 - and fuse panel A from the battery pole.

- Remove the battery interrupt igniter (N253) - item 7 -.

- Remove fuse panel A.

Check the exact assignment for fuse panel A in the current wiring diagram.

Installing

Tightening specification => [ Fuse panel A tightening specifications ] Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Assembly Overview.

Install in reverse order of removal, observing the following:

- Install the battery interrupt igniter (N253).