Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A5 Quattro Coupe (8T3) L4-2.0L Turbo (CAEB) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Relay Carrier and Fuse Carrier, Passenger Compartment >> 3-Pin Relay/Fuse Panel

3-Pin Relay/Fuse Panel







3-Pin Relay/Fuse Panel

Removing





- Switch off ignition and remove ignition key.

- Remove driver's storage compartment.

- Disengage the 3-pin relay/fuse panel by pressing the retaining springs in the - direction of the arrow - and remove the relay/fuse panel - 1 -.

- Unclip the fuse panel on the relay and fuse panel.

- Remove the relay and control modules.





- Release the retaining clips - arrows - and press the relay carrier - 2 - back and out of the bracket - 1 -.

• The exact assignment of the 3-pin relay/fuse panel can be found in the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install driver's storage compartment.
pro multis · About Operation CHARM