Operation CHARM: Car repair manuals for everyone.

Interior CAN Cut-Off Connector







Interior CAN Cut-Off Connector

Removing

- Switch off ignition and remove ignition key.

- Remove the left lower trim on the A-pillar.

- Press retaining tabs - 1 - and release retainer - arrow -.





- Remove the interior CAN cut-off connector (T46i) - item 2 -.

For the exact assignment of the interior CAN cut-off connector, see the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the left lower trim on the A-pillar.